Ends Soon: +15% OFF | Code: LABOR15

How to Install the Wrap-Around Rod

by Travis Blackout Expert in Product Guides

Curtain Rod Installation Instructions

Please note, you will need two people to install this rod.

1. Assemble the Curtain Rod

  • Start by threading the curtain rod pieces together.

  • They should connect smoothly. If they don’t, they may not be properly aligned—double-check and realign as needed.

  • Make sure the pieces on each end of the rod are the ones with the head mounts (these have small holes near the ends).

2. Determine the Rod Length

  • Hold the assembled rod up to your window to decide on the ideal width.

  • We recommend going as wide and as high as possible for the best look and coverage, so the curtains just touch the floor.

  • Screw on one bracket (either side).

3. Position the Curtains

  • Slide your curtains onto the rod.

  • Hold the rod with curtains up to the window to visualize where the brackets should go.

  • Put the other bracket on the rod once all of your curtains are on the rod & ready to be hung.

4. Mark Bracket Placement

  • Once you’ve chosen a general height and width, mark all 4 bracket holes on the wall with a pencil.

  • You can either screw directly into the wall or drill a pilot hole first, about the size of the screw.

5. Ensure the Bracket Holes Are Level

  • Check that both bracket holes are level using a level tool or by eye.

  • If needed, adjust one of the marks to match the other.

6. Have someone hold the rod with the curtains, while the brackets are screwed into place.

Note: the brackets should be fully tightened into the ends of the rod.The brackets must be aligned with so both will screw into the wall, so one will be loose to allow for it to be installed.

Previous Post Next Post

Related Posts

How to Choose Your Curtain & Rod Size

  How to Choose Your Curtain Size Each Sleepout curtain is 52″ wide. Follow these steps before installing your curtain rod. Step 1: Plan Your Rod Width Measure the window frame from edge to edge, then add at least 12″ so the rod extends 6″ past each side. Window width + 12″ = planned rod width Step 2: Choose 2 or 4 Curtains Rod up to 52″: Choose 2 curtains Rod wider than 52″: Choose 4 curtains This gives the curtains enough fabric to create a full, gathered look when closed. Step 3: Choose Your Length Sleepout curtains are available in 64″, 84″, 96″ and 108″ lengths. 84″ is the most common choice, but taller windows and ceilings may need 96″ or 108″ curtains. Step 4: Buy Your Curtains Before Installing the Rod Order your curtains first. Once they arrive, place them on the rod and hold them where you want the curtains to end—typically just above the floor. Mark the bracket position, then install the rod at that height. This ensures your curtains hang at exactly the right length.

Learn more

What Is Sleepout Fabric Made Of? Blackout, Safety, and Care

Sleepout® fabric is a proprietary synthetic, polyester-based weave. The sewn-in label reads “100% polyester.” It combines full blackout performance, durability, portability, and low chemical emissions. 100% blackout Sleepout fabric blocks 100% of light—not “mostly” or “almost.” It can make a room dark during the day, helping cue the body to rest and making it easier to fall asleep and stay asleep. Thermal and noise insulation The dense fabric provides thermal insulation, helping keep a room cooler in summer and warmer in winter. It also dampens outside noise for a quieter sleep environment. Although blackout fabrics can absorb heat, Sleepout curtains use an HOA-approved white backing that reflects sunlight rather than absorbing it. Feel, durability, portability, and care The fabric is softer than stiff or plastic-feeling blackout materials and is designed for durability. It is lightweight, foldable, machine-washable, and suitable for travel, hotels, or anywhere you need a dark sleep space. It works with Sleepout curtain products, including Sleepout Portable. Material and safety rationale Sleepout chose a proprietary polyester-based weave to avoid harmful treatments and chemical residues while maintaining blackout performance and durability. Cotton, linen, and other “natural” curtain fabrics can require processing such as: Formaldehyde-based resins for wrinkle resistance and shape retention Plastic-based coatings to stabilize fibers Sterilization chemicals during finishing A “100% cotton” label may not account for synthetic additives, and some natural-fiber curtains fail standards such as GREENGUARD Gold because of formaldehyde and other toxins. Sleepout's polyester construction is the only approach the company found that met its safety and performance goals. Certifications and chemical safety Sleepout fabric is lab-tested, certified non-toxic, and hypoallergenic. It is OEKO-TEX® Standard 100 certified at Class I, meaning it has been tested for harmful substances and is safe for babies and sensitive individuals. It is the world's only blackout fabric with that OEKO-TEX® certification and was the first blackout fabric to meet the standard. Sleepout curtains are the world's only blackout curtains certified GREENGUARD Gold by UL. Sleepout owns the GREENGUARD Gold certification. The exact fabric customers receive—not merely a similar material—has been tested for more than 15,000 volatile organic compounds (VOCs). GREENGUARD Gold certification indicates low chemical emissions and suitability for indoor environments. Sleepout fabric is completely free of formaldehyde and is the world's only blackout fabric to make that claim. Its polyester-based synthetic blend avoids the dangerous formaldehyde levels found in other curtains. While heat can cause other blackout fabrics to off-gas harmful chemicals, Sleepout curtains are designed to remain safe in direct sunlight without releasing dangerous fumes into the sleep space.

Learn more

Sleepout Glide Curtain Rod: Measurements and Installation

The Sleepout Curtain Rod adjusts from 40 to 80 inches to fit a range of window widths. You may make the rod longer by ordering more rods and use the brackets to support it in the middle. Before you install For the best look and coverage, position the rod as high and wide as possible around the window. The rod does not include end caps or finials. They are not required, but standard-size options can be purchased elsewhere in many styles.  Install the Sleepout Curtain Rod Assemble the rod. Connect the threaded rod sections. If a connection is not smooth, check the alignment and reconnect it. Use the sections with head mounts—the small holes near the ends—as the two end pieces. Set the rod length. Hold the assembled rod over the window and choose the width. Go as high and wide as possible for better coverage. Add the curtains. Slide the curtains onto the rod. Hold the loaded rod over the window to visualize the bracket positions. Mark the first bracket. Mark one bracket hole with a pencil. Either drive the screw directly into the wall or drill a pilot hole approximately the size of the screw. Center the rod. Measure from the first bracket hole to the center of the window. Use the same distance from the center to mark the opposite bracket hole. Level the brackets. Check the two marks with a level or by eye and adjust as needed. Install the brackets. Disassemble the brackets to make them easier to screw in. Install the top screw for each bracket. Once both are level, drill and install each lower screw. Adjust the brackets. Reassemble them on the wall and set their distance from the wall. Loosen each thumbscrew—the small screw on the side—by hand. Hang the rod. Place the rod in the brackets. If it is difficult to reach, lift one side at a time while resting the other end gently on the floor. Secure the rod. Tighten both thumbscrews by hand.

Learn more

Leave a comment

Please note, comments need to be approved before they are published.